Function: VAA-4E4A-G2-ZA/EA2
The VAA-4E4A-G2-ZA/EA2 is an AS-Interface module with 4 Inputs and 4 outputs. Mechanical contacts (e. g. push buttons) as well as 2-, 3- and 4-wire sensors can be connected to the inputs. The outputs are electronic outputs, which can be collectively loaded with 24 V DC and 1 A per output
The IP67 flat module is ideal for applications in the field. An addressing jack is integrated in the module
The connection for the sensors/actuators is via M12 x 1 screw connections. An LED is provided on the top of the module, for each channel, to indicate the current switching status. Similarly, an LED is provided to monitor the AS-Interface communication and to indicate that the module has the address 0. LEDs are also provided to indicate AS-Interface voltage and external power supply
The mounting plate U-G2FF is used as standard for the connection to the AS-Interface flat cable and the external 24 V DC supply. The specially designed base enables the user to connect flat cable from both sides
The device incorporates communication monitoring, which switches off power to the outputs if no communication has taken place on the AS-Interface line for longer than 40 ms
An overloading of the internal input supply or of the outputs is signalled to the AS-interface master via the “Peripheral fault” function
VAA-4E4A-G2-ZA / EA2
VAA-4E4A-G2-ZA / EA2 یک ماژول AS-Interface با ۴ ورودی و ۴ خروجی است. تماس های مکانیکی (به عنوان مثال دکمه های فشار) و همچنین سنسورهای ۲ ، ۳ و ۴ سیم می توانند به ورودی ها متصل شوند. خروجی ها خروجی های الکترونیکی هستند که می توانند با ۲۴ ولت DC و ۱ آمپر در هر خروجی بارگیری شوند.
ماژول تخت IP67 برای برنامه های کاربردی در این زمینه ایده آل است. جک آدرس دهی در ماژول یکپارچه شده است.
اتصال سنسورها / محرک ها از طریق اتصالات پیچ M12 x 1 است. در بالای ماژول برای هر کانال یک LED در نظر گرفته شده است تا وضعیت سوئیچینگ فعلی را نشان دهد. به همین ترتیب ، یک LED برای نظارت بر ارتباطات AS-Interface و نشان دادن این که ماژول آدرس ۰ دارد ، ارائه شده است. LED ها نیز برای نشان دادن ولتاژ AS-Interface و منبع تغذیه خارجی ارائه شده اند.
صفحه نصب U-G2FF به عنوان استاندارد برای اتصال به کابل تخت AS-Interface و منبع خارجی ۲۴ ولت DC استفاده می شود. پایه مخصوص طراحی شده کاربر را قادر می سازد کابل تخت را از دو طرف متصل کند.
این دستگاه شامل مانیتورینگ ارتباطات است که اگر بیش از ۴۰ میلی ثانیه ارتباطی روی خط AS-Interface برقرار نشده باشد ، خروجی را خاموش می کند.
اضافه بار منبع ورودی داخلی یا خروجی ها از طریق عملکرد “خطای محیطی” به استاد رابط AS علامت گذاری می شود. ارتباطات از طریق رابط AS دست نخورده باقی مانده است.
ویژگی ماژول اینترفیس سنسور مدل VAA-4A-G2-EA2
- گواهی AS-Interface
- درجه حفاظت IP67
- آدرس جک
- اتصال کابل تخت با روش سوراخ کابل ، راهنمای کابل تخت متغیر
- نظارت بر ارتباطات
- ورودی سنسورهای ۲ ، ۳ و ۴ سیمه
- منبع تغذیه خروجی از ولتاژ کمکی خارجی
- منبع ورودی از AS-Interface
- اتصال زمینی (FE) امکان پذیر است
- نمایش عملکرد برای گذرگاه ، داخلی. ولتاژ کمکی ، ورودی و خروجی
- تشخیص میزان اضافه بار در منبع تغذیه
- تشخیص اضافه بار خروجی
نقد و بررسیها
هنوز بررسیای ثبت نشده است.