[vc_row][vc_column][vc_column_text]
Product Description | ||
---|---|---|
G2 flat module ۴ inputs (PNP) |
General specifications | ||
---|---|---|
Node type | Standard node | |
AS-Interface specification | V3.0 | |
Required master specification | ≥ V2.0 | |
UL File Number | E223772 | |
Indicators/operating means | ||
LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor supply |
|
LED PWR | AS-Interface voltage; LED green | |
LED IN | switching state (input); 4 LED yellow | |
Electrical specifications | ||
Rated operating voltage | ۲۶.۵ … ۳۱.۶ V from AS-Interface | |
Rated operating current | ≤ ۴۰ mA (without sensors) / max. 240 mA | |
Protection class | III | |
Surge protection | Ue: Over voltage category III, safe isolated power supplies (PELV) | |
Input | ||
Number/Type | ۴ inputs for 2- or 3-wire sensors (PNP), DC | |
Supply | from AS-Interface | |
Voltage | ۲۱ … ۳۱ V | |
Current loading capacity | ≤ ۲۰۰ mA (TB ≤ ۴۰ °C), ≤ ۱۵۰ mA (TB ≤ ۶۰ °C), short-circuit protected |
|
Input current | ≤ ۸ mA (limited internally) | |
Switching point | ||
۰ (unattenuated) | ≤ ۱.۵ mA | |
۱ (attenuated) | ≥ ۴.۵ mA | |
Signal delay | < 2 ms (input/AS-Interface) | |
Signal frequency | ≤ ۲۵۰ Hz | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN ۶۲۰۲۶-۲:۲۰۱۳ EN ۶۱۰۰۰-۶-۲:۲۰۰۱ EN ۶۱۰۰۰-۶-۴:۲۰۰۱ | |
Standard conformity | ||
Degree of protection | EN ۶۰۵۲۹:۲۰۰۰ | |
Fieldbus standard | EN ۶۲۰۲۶-۲:۲۰۱۳ | |
Input | EN 61131-2:2007 | |
Emitted interference | EN ۶۱۰۰۰-۶-۴:۲۰۰۱ | |
AS-Interface | EN ۶۲۰۲۶-۲:۲۰۱۳ | |
Noise immunity | EN ۶۱۰۰۰-۶-۲:۲۰۰۱ | |
Programming instructions | ||
Profile | S-0.1 | |
IO code | ۰ | |
ID code | ۱ | |
ID1 code | F | |
ID2 code | F | |
Data bits (function via AS-Interface) | input output | |
D0 | IN1 – | |
D1 | IN2 – | |
D2 | IN3 – | |
D3 | IN4 – | |
Parameter bits (programmable via AS-i) | function | |
P0 | Communication monitoring P0 = 0 monitoring = off, the outputs maintain the status if communication fails P0 = 1 monitoring = on, i.e. if communication fails, the outputs are deenergised (default settings) |
|
P1 | Input filter P1 = 0 input filter on, pulse suppression ≤ ۲ ms P1 = 1 input filter off (default settings) |
|
P2 | Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings) |
|
P3 | not used | |
Ambient conditions | ||
Ambient temperature | -۲۵ … ۶۰ °C (-13 … 140 °F) | |
Storage temperature | -۲۵ … ۸۵ °C (-13 … 185 °F) | |
Relative humidity | ۸۵ % , noncondensing | |
Climatic conditions | For indoor use only | |
Altitude | ≤ ۲۰۰۰ m above MSL | |
Pollution degree | ۳ | |
Mechanical specifications | ||
Degree of protection | IP67 | |
Connection | cable piercing method flat cable yellow inputs: M12 round connector |
|
Material | ||
Housing | PBT | |
Mass | ۱۰۰ g | |
Tightening torque, cable gland | ۰.۴ Nm | |
Mounting | Mounting plate |
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_btn title=”دانلود کاتالوگ محصول” color=”blue” link=”url:https%3A%2F%2Fwww.salamsanat.com%2Fwp-content%2Fuploads%2F2021%2F04%2F187746_eng.pdf|||”][/vc_column][/vc_row]
برای امتیاز به این نوشته کلیک کنید!
[کل: ۰ میانگین: ۰]
نقد و بررسیها
هنوز بررسیای ثبت نشده است.